Prime Filter-1
Carbon pre-filter · slot 1
Removes chlorine, sediment and odours before water reaches the electrolysis chamber. Standard cartridge for all L, R, LV and RV series. Counts 3000 L → 0; reset to 3000 L after change.
Every part below is the original Korean factory cartridge — held in our Singapore warehouse so reorders ship in 4 to 5 working days. Tap the picker further down to build your order in 60 seconds.
Internal filters · the cartridges inside your ionizer
Carbon pre-filter · slot 1
Removes chlorine, sediment and odours before water reaches the electrolysis chamber. Standard cartridge for all L, R, LV and RV series. Counts 3000 L → 0; reset to 3000 L after change.
Carbon · slot 2
Second-stage activated carbon polish for taste and residual chlorine. Pairs with Filter-1 in slot 1; same form factor, different role. Standard for L, R, LV and RV series.
Ultra Filtration · 0.1 micron
Hollow heavy-duty fibre filters down to 0.1 micron, removing bacteria and micro-organisms. With UF + UV light, your family can drink ionized alkaline water without boiling. Counts 5000 L → 0.
Plate descaler · once a year
Food-grade citric acid cartridge that scrubs mineral build-up off the titanium plates. Keeps electrolysis efficiency high so you keep getting the full alkaline range. Run once every 12 months.
External pre-filters · for under-counter or faucet installs
Mount upstream of the ionizer when your inlet water needs extra polishing or when you're running a hidden faucet install.
Inline · 0.1 micron
Inline ultrafiltration cartridge that sits before the ionizer. Catches bacteria and protozoa at 0.1 micron so the internal stack only handles polished feed. Common in under-counter setups.
Antibacterial · positively-charged media
Nano-fibre cartridge with a positive charge that captures negatively-charged bacteria, viruses and endotoxins as water passes through. Pairs with the UF stage for full microbiological protection.
Inline carbon · chlorine + taste
Inline activated carbon for inlet polishing before the ionizer. Strips chlorine, taste and odour from the mains water so the internal Filter-1 lasts the full 3000 L cycle.
Hardware · holder brackets for external setups
Holds 2 external pre-filters
Wall-mountable bracket for two inline pre-filters side-by-side (e.g., Carbon + UF). Colour-coded inlet/outlet caps for easy plumbing. Includes mounting screws and fittings.
Holds 3 external pre-filters
Wall-mountable bracket for three inline pre-filters side-by-side (e.g., Carbon + UF + Nano Positive). For full under-counter setups. Colour-coded ports for easy install. Includes screws and fittings.
Tap +/− to pick the quantity for each filter, then message us on WhatsApp. We’ll send you an invoice — once payment is done, you’ll receive your filters at your doorstep within 4 to 5 working days.
Need external pre-filters or holder brackets? WhatsApp us — we'll guide you to the right combo for your install.
Already a customer? Sign in for one-tap reorder with your details and machine pre-filled.
Filter #1 will count down from 3000 litres to 0, and Filter #2 will count down from 5000 litres to 0. The ionizer displays both sets of numbers on the panel. You should order your filter when it drops just below 300 litres — that gives you buffer to receive the new one before the current filter runs out.
Yes — both cartridges twist in by hand, no tools needed. We include a one-page printed guide in every shipment, and you can WhatsApp us a photo if anything looks off.
Yes. We hold inventory locally so you don’t wait on Korean shipping. Most reorders should be delivered to your doorstep within 4 to 5 working days.
Every cartridge is the original part from the Korean factory. Third-party filters can damage the electrolysis chamber and void your warranty — we strongly recommend genuine only.
Free islandwide on filter reorders over S$ 100. Below that, a flat S$ 8 courier fee applies.
